Land Craft X6
Land Craft X6 is our open bow boat project designed for a customer from Sweden. The main goal was to build a quality vessel at a reasonable price, economical, seaworthy and safe to operate. The Land Craft X6 hull is the same to Land Craft C6 of which 7 hulls were built, but instead of a deckhouse it has a centre console for two people. In this project we found the best balance between seaworthiness and maximum load capacity.
Each Land Craft X6 boat can be modified and equipped to suit the customer's goals and objectives.
Each Land Craft X6 boat can be modified and equipped to suit the customer's goals and objectives.
Layout
Main characteristics
LoA – 6.36 m
LwL – 5.90 m
Beam – 2.50 m
Draft – 0.5 m
Board height on the middle from the keel – 1.35 m
Board height on the middle from the chine - 0.95 m
Overall height – 2.50 m
Transom height – 0.51 m
Open bow beam - 1.80 m
Working deck beam - 2.28 m
Working deck length - 2.80 m
Hull material – Marine grade aluminum 5083
LwL – 5.90 m
Beam – 2.50 m
Draft – 0.5 m
Board height on the middle from the keel – 1.35 m
Board height on the middle from the chine - 0.95 m
Overall height – 2.50 m
Transom height – 0.51 m
Open bow beam - 1.80 m
Working deck beam - 2.28 m
Working deck length - 2.80 m
Hull material – Marine grade aluminum 5083
Keel – 8 mm
Bottom – 5 mm
Stiffener structure – 4 mm Board – 4 mm
Deck and superstructure – 4 mm
Deadrise (stern/middle/bow) – 16/20/28
Displacement – 1.600 kg
Fuel tank – 190 L
Passenger capacity – 5 persons
Carrying capacity – 1.000 kg
Engine power – 100/175min/max hp
Max. speed – 35 knots.
Bottom – 5 mm
Stiffener structure – 4 mm Board – 4 mm
Deck and superstructure – 4 mm
Deadrise (stern/middle/bow) – 16/20/28
Displacement – 1.600 kg
Fuel tank – 190 L
Passenger capacity – 5 persons
Carrying capacity – 1.000 kg
Engine power – 100/175min/max hp
Max. speed – 35 knots.
Standard specification
- Top quality marine grade aluminum hull (AL 5083).
- Cockpit, indoor floor and foredeck with non slip coating
- Wind shield glasses with tinting
- Hand rails 45 mm aluminum pipe.
- Fuel tanks 190 L.
- Mooring cleats x 4.
- Isolation. Warm/sound/vibration/unsinkable blocks.
- Pilot console
- Pilot and Passenger locker seats with cushions
- Anodes x 2
- Ceiling lighting in the salon and cockpit.
- Steering wheel
- Socket -12 V, USB X 2
- Main electric control panel, 10 keys
- Compass
- Fusebox
- Main switch
- Navigation lights: starboard, portside, top, stern.
- Wiring to engines
- Windshield wiper x 1
- Neck for fuel tank
- Fuel sensor
- Fuel gouge
- Fuel tank air vents
- Fuel piping
- Bilge electric pump x 2
- Battery box
- Battery terminals x 2
- Fuel filter separator
- Fender
- Non return valves x 2
- Latch lock stainless steel x 4
- Open bow mechanical
Options
- Painting custom RAL color or Polysilazane nanno coating.
- Steering wheel in natural leather and with logo Seacore
- Additional transom for small outboard up to 15 hp
- Hydraulic engine control kit up to 250 hp.
- Batteries x 2.
- Searching light.
- LED navigation lights.
- Interceptors.
- Echo sounder.
- Marine horn.
- Webasto heater 12V , 2 kWt.
- Pilot hatch.
- Passenger hatch.
- Shock Pilot seat with longitudinal slider.
- Shock Passenger seat with longitudinal slider
- Stern anchor system: anchor 10 kg, anchor chain 3m., anchor rolls, anchor winch 12V.
Price on request
